上海玉研科學儀器有限公司

電話:021-35183767
???021-54377179

傳真:021-35183767-8008

QQ:3007536035

地址:上海市閔行區興梅路485號 XingMei Rd 485,Shanghai,China

當前位置:首頁 > 細胞培養及分析設備 > 顯微鏡物鏡加熱器
細胞培養及分析設備

顯微鏡物鏡加熱器

時間:2016-10-02來源:本站作者:玉研儀器

詳細介紹

顯微鏡物鏡加熱器 OBJECTIVE HEATER 

Features

Temperature controlled heating band
Easy installation around the objective
Fits any objective on the market
Compatible with the following OKOLAB Controllers:
H301-T-UNIT-BL-PLUS
UNO-T-H-PREMIXED
UNO-T-H-CO2
H401-T-CONTROLLER
Compatible with Inverted and Upright Microscopes
Self CalibrationRoutines with BL controllers
Voltage: 24 V
Power: 13 W



When should I use an Objective Heater
You should use an objective heater, if you:

Perform Oil Immersion Imaging with a Top Stage Incubator
Use dipping lens with an upright Top Stage Incubator
Why should I use an Objective Heater?
Because, if you don't, sample temperature will drop due to oil contact with the cold objective, as shown in the following graph.

 

Step 1: Objective not in contact with Petri 2; Objective Heater Off.

Step 2: Objective in oil contact with Petri 2; Objective Heater Off.

Step 3: Objective in oil contact with Petri 2; Objective Heater on, Offset value 5.3°C.

During the self calibration routine, the offset value of the objective heater is progressively increased, until T2 reaches the desired set point temperature of 37.0°C.

Figure 3 reports the profile of T1, T2, and of Objective Heater Temperature during the experimental campaign described above.

 

 

 

    您想了解更多詳細資料嗎?

    請與我們聯系:

    TEL021-35183767,021-54377179

         18502129044

    QQ3007536034

    微信:yuyanbio

    Mailyuyanbio@126.com

    歡迎您的咨詢!

qq在線客服
贵阳麻将机维修